![]() |
|
|
|
#1
|
||||
|
||||
|
Used to have to clean just about every trim pot control mounted on the circuit boards on those sets. AGC, AGC delay, B+, horizontal frequency, pin cushion, sub hue, ACC, video drives, and any others that I saw.
|
|
#2
|
||||
|
||||
|
Its in Sams 2041-3
BUT this set may be one that had two different chassii. The audio out was the big difference. So it may be best to look up the chassis ##. As far as problem goes can you put up a video of it ?? 73 Zeno ![]() LFOD ! |
|
#3
|
|||
|
|||
|
I cleaned the controls, still bad, it flashes between a normal picture and a very dim washed out one with reds and blues only, yea.. the green gun is still working. where and what do I look for chassis number on these?
thanks Keith |
![]() |
| Thread Tools | |
| Display Modes | |
|
|