Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-22-2022, 11:45 AM
Username1's Avatar
Username1 Username1 is offline
Not sure how I got here.
 
Join Date: Dec 2009
Location: Orange County NY
Posts: 3,668
Quote:
Originally Posted by timmy View Post
Well so much for the resistors they made no difference I kind of had a feeling the old ones were not bad. there is 132v there but soon as putting it on pin 8 it drops to 63v so something is going on here that I’ve yet to figure out. On v1 pins 1&3 are 15v and pin 2 7.25v it’s like the tube is locked on full pulling the 132v down to 63v. So I lifted the power on pin 8 it’s not the tube pulling the voltage down pulling the 8.2k ground drops the voltage. Then with the ground off I get the proper ohms.

Hi!

Sorry, Our crappy internet service was off for several days.... If you have 15V
on the Cathode of tube V1, 6EH7 the 1St Video IF, then I would be wondering
what the plate voltage is? is the 275V source right, and is it 275V or lower?
Also what id the voltages on each side of R38, a 22 Ohm, R44, a 47 Ohm,
and R45, a 560 Ohm. Also what voltages are on both sides of R37, a 2.2K Ohm?

Please make these readings with everything hooked up.
Also are your power supply voltages back to what they should be?

.
__________________
Yes you can call me "Squirrel boy"
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:32 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.