![]() |
|
#11
|
||||
|
||||
|
Since you stated that the voltages on pins 7-8 of the V1-V2 are wrong, but the 6EH7s are NOS, and the problem is not a bias 275v problem and extremely unlikely to be disc cap related, then once again the best path is to replace the power resistors, no matter how they seem to check out.
List here. main power diodes https://www.mouser.com/ProductDetail...2B4kkscA%3D%3D 6.8k 3w (r40, r49) https://www.mouser.com/ProductDetail...0BKWoLFQ%3D%3D 2.7k 3w (r41, r50) https://www.mouser.com/ProductDetail...Wwtn4Z2Q%3D%3D 8.2k 3w (r39 , r48 ) https://www.mouser.com/ProductDetail...2a7TUHog%3D%3D Yes, use all 3w resistors, they will be smaller then the ones replaced, and much more reliable. In fact replacing all resistors in the IF may be the only way to get it working again, and even then, you may not be able to.
__________________
=^-^= Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte. いとおしい人のために |
| Thread Tools | |
| Display Modes | |
|
|