Quote:
Originally Posted by Yamamaya42
It's very doubtful that his meter is 10m, because he has an electrician's (clamp) meter, and not a full function DVM, this has been brought up several times before by quite a few, including myself that he invest in a better one that has a dedicated 10a scale, and was made for the electronics field rather than an electrician, because it is very likely it's giving inaccurate readings in some cases.
He has this.
http://www.instrumart.com/assets/uei...nix-manual.pdf
Again, a better meter is suggested before believing any voltage readings, one that is known to be 10m, as the one on hand may be loading the circuit down. |
While not necessarily “better “ from a quality standpoint, this inexpensive dmm would be more suited to the task at hand.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
10 megohm input impedance (I have measured mine).
10 amp DC range.
No auto range (no confusion).
Inexpensive @ $12.50 (no tears if you break it).
not affiliated,
jr
10-04-2022, 02:41 PM
Threaded Mode