Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 09-05-2022, 11:33 PM
Lain94's Avatar
Lain94 Lain94 is offline
VideoKarma Member
 
Join Date: Jul 2022
Posts: 145
Quote:
Originally Posted by zeno View Post
If you are chasing a specific problem you can tack in a cap
of the same value & voltage as a test.
If not leave it be for now.
If you are recapping the set just do a few at a time & recheck as
you go. Its always best to get the PS running first the Hoz/HV
then vert. In other words one stage at a time. Mass recapping
very often leads to a broken set thats MUCH harder to fix.

73 Zeno
LFOD !
I 100% agree with this. I will only start with the known bad caps first and go from there if necessary just so things will not get too mixed up. On a side note. What are your thoughts on "picture tube brighteners". I have one that was given to me and it is for 90 degree angle rectangular color picture tubes. It basically uses a small transformer to step up the voltage and increase the brightness on a dim/dark weak crt. Is there any drawback to this? I may use that as a temporary remedy for the CRT until I find a suitable replacement for the high hour crt in the set.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.