Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 08-30-2022, 09:40 AM
Notimetolooz's Avatar
Notimetolooz Notimetolooz is offline
VideoKarma Member
 
Join Date: Mar 2014
Location: Dallas, TX
Posts: 548
That is a Motorola brand cap and I don't know whether it is paper of plastic film. It is a molded plastic case.
There were some caps by Sprague that looked similar. The ones with white printing were paper, the ones with red printing were plastic film.
That was a situation that was not very common where it was hard to tell from the general look.
Those could actually be made by Sprague but branded by Motorola, that kind of thing happened many times.
If you have a capacitance leakage tester that tested using hundreds of volts it would tell if the capacitor is good.
I'm pretty sure someone else may know how they are constructed.
I have cut similar caps apart but it can be hard to tell, the paper can be extremely thin and look transparent like plastic. They also can be very tightly wound.
Also from the time the TV is from they could be either one. Sometimes the SAMS parts list states if it is paper or plastic. SAMS also lists electrolytic caps separately.
With out knowing for sure, I would not replace those unless they were suspected to cause a problem.

Last edited by Notimetolooz; 08-30-2022 at 09:45 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:01 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.