|
|
|
|
|
#1
08-18-2022, 04:58 PM
|
||||
|
||||
|
The diagram has 2 capacitors that are to be added if the 4 section electrolytic can is replaced with an (electrolytic which is not the non-inductive type). My set was worked on by another individual who took the can apart and put new electrolytics in it. So modern caps....inductive or not.? I have never seen that note on a diagram.one cap junctions with the osc.coil going to the converter tube grid and the other to the b plus line .
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
