Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 08-14-2022, 04:37 PM
Chris K Chris K is offline
VideoKarma Member
 
Join Date: Jun 2022
Posts: 1,534
Jesus...what an ordeal chasing my tail. I'm sure I checked that resistor and got 1K. Maybe something happened to it while I was working in there. Anyway...I got it...sorta. It's supposed to be +75V and now it's +70. Close. So for the CRT, Pin 1 and Pin 12 are perfect at 140V. Pin 2 at 70V Pin 11 is 225V. Pin 10 is still an issue. I've got 275V. The voltage table I have in the Sams says it should be 290V but the earlier schematic we've been looking at says 330V. I believe 290V is correct for this chassis. It's a later model that the schematic in the Riders. It's #1 off the flyback.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:10 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.