Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 08-13-2022, 09:01 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
The negative supply makes this seem confusing but with the voltage's shown on the schematic the grid is basically 1 volt more negative than the cathode, which seems reasonable to bias that tube on. Another way to look at it is that the cathode resistor is dropping 1 volt, which makes the cathode 1 volt positive relative to the grid being pulled to -85V . Very similar to a cathode biased class A audio stage.

As Tim mentioned maybe we are chasing a red herring here. Possibly when the video signal is present it biases the grid more negative which would make the tube conduct less, bringing the plate to the positive voltage shown on the schematic.

Last edited by Kevin Kuehn; 08-13-2022 at 09:08 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:43 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.