![]() |
|
#11
|
||||
|
||||
|
Quote:
If slug is way out but HV OK the hoz osc is way off the norm. Recheck caps & VALUES used. In theory at this point the sweep is giving full width & HV Try hooking up a source & look for clues. Hoz AFC can be defeated by grounding it out at the right point & will give a "floating" pix. I dont have schematic so cant say exactly where. Never seen H AFC or the feedback from the FBT cause this prob. BUT ?? BTW if this set uses 6BL8's or 8BL8's just swap them out to test. It was Motos 6GH8 but a better tube. 73 Zeno ![]() LFOD ! |
| Thread Tools | |
| Display Modes | |
|
|