Motorola ts907 low hv

[timmy]

Well that 375 volts I posted now dropped to I think was 350 volts the b+ diodes are not shorted but one side of the diodes is only 179 volts that comes to 358 volts it’s to low and all the big resistors for b+ test like new so with having low hv I would think it because of the low b+ and the reg tube cap off does nothing the hv should jump to like 30 kv and I had a new flyback that I put in and that made no difference. I’m kind of lost at this point. The g2 settings red low blue and green about half.