Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 07-23-2022, 10:38 AM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by Chris K View Post
Quick question...my HV is low...about 3.5Kv and it should be 8.5Kv. New damper, horizontal output tubes and the flyback ohms out fine. What else should I be checking???
Do you have the yoke in circuit? I don't see if you've mentioned if you have 330v on pin 10 of the CRT socket? 330v is the B Boost generated by the damper, and if it's not present or low could explain low HV. B Boost would also be measurable at pin 8(cathode) of the damper. Otherwise a weak 1B3 HV rectifier or drifted high R187 HV filament resistor could explain it.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:46 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.