Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Portable Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 06-28-2022, 08:17 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
1) sometimes RCA VHF tuners get so dirty they quit.
2) Check the UHF IF cable. They open especially if just crimped.
3) be sure UHF is getting B+. Prob 12 VDC.
4) In the UHF there are U shaped grounds along the rotor.
Put a few drops of WD40 on them & run back & forth.
You can pull, clean & bend them but thats risky.

You can put IF in to the UHF IF input to test the VHF tuner on UHF.
If you dont have an analyst you can make a tuner subber out of a scrap tuner.
BTW on RCA the tuners have a number KRK###. thats the part number.
they also had a six digit p#.

73 Zeno
LFOD !
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:21 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.