Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Recorded Video

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-26-2022, 10:08 PM
YamahaFreak's Avatar
YamahaFreak YamahaFreak is offline
<-- CSXT 6038, EMD GP40-2
 
Join Date: Dec 2005
Location: TOO sunny Florida, USA
Posts: 580
Did some preliminary testing. In the attached image, the circled diodes test shorted (same readings both ways) and the one circled resistor is open. I haven't looked up how to test caps and transistors with my meter yet.

I'd assume a totally shorted rectifier is a pretty bad thing, hopefully the whole unit isn't toast.
Attached Images
File Type: jpg 20220626_230619.jpg (147.1 KB, 13 views)
__________________
Sony Trinitron Fan
Reply With Quote
  #2  
Old 06-26-2022, 10:36 PM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
Quote:
Originally Posted by YamahaFreak View Post
Did some preliminary testing. In the attached image, the circled diodes test shorted (same readings both ways) and the one circled resistor is open. I haven't looked up how to test caps and transistors with my meter yet.

I'd assume a totally shorted rectifier is a pretty bad thing, hopefully the whole unit isn't toast.
The 4 diodes make up the full wave rectifier circuit you will read something both ways. Probably OK but to test you'd need to de-solder one end of each and test individually. The resistor you have circled is a very high meg-Ohm resistor can't quite tell if the 2nd band is brown or violet, but regardless it looks like either 2.1 or 2.7 meg Ohms and provides a static electricity path to ground from the cold side to the hot side. Never seen one there fail. It's going to read open unless you have your meter set on the highest Ohms scale.

The diode though, and Q901 and Q902 I would be suspicious of. And anything else in that cooked area. It's been getting way too hot there.

You need an ESR meter to test all the caps. If you plan on doing this sort of thing as a hobby (or a living☺) you need to get one, not just to fix this machine. Said it before: Electrolytic capacitors are the bane of electronics!

And yes if those 4 diodes that make the full-wave AC rectifier are all shorted it probably took a nasty power surge or lightning hit.
Reply With Quote
  #3  
Old 06-27-2022, 08:56 AM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
I will add to Eds comments.
First watch a few SMPS U-tubes & and get to know how they
work. Pick simple ones. There are some real monsters !!
There are several styles so pay attn to the block diagrams.

Blown fuse is usually the power FET, the bridge or MOV if it has one.
If the bridge is bad change ALL FOUR at once.
If the FET is shorted you need to find why. Usually lightning but
other possabilities. Often boils down to gambling an FET or not.
On yours the burned area is VERY suspicous

73 Zeno
LFOD !
Reply With Quote
  #4  
Old 06-27-2022, 02:00 PM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
FET? Actually it looks like a 2SC4418 or 4419 (can't quite tell from the picture) Silicon NPN high speed power transistor. Pretty common. Have seen those lose gain and not work but still test good with a multimeter.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:29 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.