Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 05-22-2022, 11:36 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by ppppenguin View Post
Usual to plug the radio etc under test into the isolating transformer.

The output of the transformer should float. Neither end grounded.

A GFCI (RCD on this side of The Pond) is of no use on the output side of an isolating transformer. Apart from the rare and special case of a failure of the transfomer itself it doesn't give any extra protection on the input side either.

If working on a hot chassis (live chassis in UK/Europe) set an isolating transformer is essential if you want to connect testgear to the set. Otherwise you can make sure the chassis is conencted to neutral and use a GFCI/RCD.
I just worked on an Emerson portable radio that has a hot chassis yesterday!
I have several sizes of isolation transformers, but I seldom use them. Old habits die hard. Our low voltage, 120 volts is a lot less hazardless.
As an electrician, I believe in GFCI's and all the receptacles that I use when repairing are GFCI equipped, either receptacle or breaker.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:45 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.