Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #35  
Old 03-28-2022, 05:27 PM
AlanInSitges's Avatar
AlanInSitges AlanInSitges is offline
VideoKarma Member
 
Join Date: Nov 2017
Location: Sitges, Catalonia, Spain
Posts: 451
OK, I got the yoke off and managed to get it apart following the old Shango video. He says that he's repaired 3 1077s with bad vertical windings, and says you have to look for the "green", where there is a little spot of corrosion. The one he repairs in the video has a clearly broken wire right under the spot. Wire reattached, and the device works again.

My yoke had an identical green corrosion spot in exactly the same place as the Shango video, but the wire is intact. In fact I've spent the last hour with my 3.5x goggles going over every part of this yoke and can't find any broken/corroded wire. Verified that the winding measures 1.2M.

A couple of questions: first, shouldn't it measure open? What's going on there?

And second, how does one go about finding the point of failure? I'm pretty sure it's not on the surface. Are yoke windings interchangeable to the point that I might be able to pull one (either a yoke or another winding) off of another set? I guess it would have to be one with a really narrow deflection angle...

Thanks everyone.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:58 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.