Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-04-2022, 07:36 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
We are getting to the place that I cant help much more remotely.
So I will give you a few more ideas.
Try to turn on a few times. Then feel the IC & Q802 ( hoz out )
They should be cool. You could also check the mains current, I
would guess it should be about 1 amp with DGS unplugged.

The light blinking looks like the supply is trying to run but sees over current
& shuts down. After that it tries to run again etc-etc-etc. Over current is
almost always from the Hoz out or HV.

73 Zeno
LFOD !
Reply With Quote
  #2  
Old 04-08-2022, 04:32 PM
bigboss80's Avatar
bigboss80 bigboss80 is offline
VideoKarma Member
 
Join Date: Feb 2022
Location: Italia/ Sardegna
Posts: 34
Quote:
Originally Posted by zeno View Post
We are getting to the place that I cant help much more remotely.
So I will give you a few more ideas.
Try to turn on a few times. Then feel the IC & Q802 ( hoz out )
They should be cool. You could also check the mains current, I
would guess it should be about 1 amp with DGS unplugged.

The light blinking looks like the supply is trying to run but sees over current
& shuts down. After that it tries to run again etc-etc-etc. Over current is
almost always from the Hoz out or HV.

73 Zeno
LFOD !
Ciao, sorry, I was away for a while.
Today, I picked up the TV again after I had parked it for a while, I put the 60w bulb back in place of the fuse and I switched on, the bulb flashed and at the same time you could hear a ticking coming from the STR area, I approached and they felt like small electric discharges, I turned off I removed the latch and I moved the STR away from the heatsink and you will not believe it but the short was caused by the heatsink in contact with the STR, (I do not understand why it makes contact, I also put the fiberglass plate between the STR and the heat sink and the thermal paste for processors back on the STR before reassembling it) in fact as soon as I restored the voltage nothing jumped and the red standby light also turned on, I have to turn on the remote control but as soon as I try to turn on the red led goes out and the tube does not show signs, there must be some other problem caused by the first time I turned it on without the diode D611, I just don't know what, here any advice?

Last edited by bigboss80; 04-08-2022 at 04:43 PM.
Reply With Quote
  #3  
Old 04-08-2022, 06:50 PM
zeno's Avatar
zeno zeno is offline
VideoKarma Member
 
Join Date: Mar 2013
Location: New Hampshire
Posts: 4,918
Slow ticking is usually a short on secondary.
Supply goes up then sees to much current so shuts off the
STR. Then it cycles again and again ...........

Can also be failing to go into "run". STR gets the on pulse but
not the run voltage. Voltage out goes up then falls. Again it can keep on trying.......

I will think about it & let you know if I have any other ideas.

73 Zeno
LFOD !
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:39 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.