Time to get this site upgraded, so we are passing the hat around. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html
We appreciate your help
in keeping this site going.
Well the side of the bridge rectifier that has the (+) and (-) marks on it measures .003V both directions and beeps and the (~) side measures 1.2V both ways and doesn't beep.
Hmm that sounds shorted. On the diode setting, the two ~(AC) pins should measure open (both directions).
For the DC side (+ and -) you should see close to 1.0v but only in one direction.