Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #38  
Old 01-19-2022, 11:08 AM
Notimetolooz's Avatar
Notimetolooz Notimetolooz is offline
VideoKarma Member
 
Join Date: Mar 2014
Location: Dallas, TX
Posts: 548
I think, unless you are very lucky and stumble onto something, you are going to have to get some more test equipment.
Many times when something is seen on a TV screen it will give a more definite cause of a problem and a scope will not be necessary. Where the image is distorted in both the horizontal and vertical directions however diagnosis is very hard. A scope would straighten things out rather quickly.
I believe your meter was trying to follow a moving target when looking at the vertical output. An interaction between the measuring cycle of the meter and the vertical signal.
Normal trouble shooting methods would look at the power supply to the suspected circuit stage first, however in this case the power for the vertical output originates in the HV CRT supply (after going through the voltage dividers). You can't measure the HV without a HV probe for your meter.
It looks to me that some supply or something else is cycling up and down over a second or two.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:49 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.