![]() |
|
#6
|
||||
|
||||
|
" Voltages
V1 (1st IF) No appreciable voltages were found on any of the pins. V2 No voltages, except for pin 7, which has 241v on it V3 Normal voltages V4 (1st Chroma) No voltages found, except for an incorrect one found on pin 8 which was 199v (Should be 85) " You have a loss of B+ to those sections.... V1, & V2. At least V1.... 245V source - Open resistor R56, R55, R52? Cap across them shorted...? Some Other Resistor?? If It's True you actually have " V1 (1st IF) No appreciable voltages were found on any of the pins." V1 6EH7 tube, V2 6EH7 tube.... " V4 (1st Chroma) No voltages found, except for an incorrect one found on pin 8 which was 199v (Should be 85) " Tube is not turned on, Not Conducting, no V Drop across load resistor...... To be expected high, above 125V because tube is not conducting..... " V2 No voltages, except for pin 7, which has 241v on it " - V2 Not turned on Not Conducting. Path from pin 7 to 245V source ok.... .
__________________
Yes you can call me "Squirrel boy" Last edited by Username1; 01-16-2022 at 12:22 PM. |
| Thread Tools | |
| Display Modes | |
|
|