![]() |
|
#27
|
||||
|
||||
|
Months later and I'm still poking around with this set. I was able to almost completely eliminate the ringing on the left by swapping through a few 19BG6s.
I then realized I had way too much width and height as this set has a rectangular mask. A few hours of playing with all the adjustments resulted in a smaller raster with pretty good linearity. Then I finished polishing the cabinet and cleaning the knobs. Hands down the most frustrating set I've worked on, but it's finally done. ![]()
|
| Thread Tools | |
| Display Modes | |
|
|