Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 12-24-2021, 12:21 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by dieseljeep View Post
Rather impressive! How do you cut the cans so perfect?
Bought and sold a set like that about 60 years ago. Mine was an earlier model that used a 3BY6 instead of the better circuit using a 3BU8.
The outward appearance was similar.
Thanks. I actually removed these and used my band saw. Then a few passes over 220 grit on a flat surface squares the end. Seems like a lot of work, but by using a very large (radiator sized ) soldering iron I'm able to heat the ground lugs and squeeze them straight with a flat nose pliers, then carefully wiggle them free. Space permitting you certainly could hack them off using a Zona saw while they're still attached to a chassis.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:22 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.