Quote:
Originally Posted by Kevin Kuehn
Reread post #245 where you had 210v at C3B. You need to follow that point to pins 5 and 6 of your 6AQ5 and see where you loose the 210V. Follow the schematic and ohm everything out. One path is from C3B positive to pin 6(screen), the other is C3B positive to the bottom(red) wire of the output transformer primary. B+ needs to go in on the red wire of the primary winding and exit on the blue wire to pin 5(plate) of the 6AQ5. If there's no connections where there should be, something has become open or otherwise mis-wired.
[Edit] Here's a picture of the bottom side of my working chassis showing the 5AQ5(6AQ5) connections so you can compare your wiring.
 |
Well besides the fact that your TV's wiring is in much better shape than mine is (the color is faded from my TV's wiring) I don't see anything different from yours and mine except that it seems you still kept some of the original can caps in circuit whereas mine are all replacent capacitors.
I really don't know what's going here.
12-23-2021, 06:02 PM
Threaded Mode