Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 12-07-2021, 11:01 PM
Benyamin39 Benyamin39 is offline
VideoKarma Member
 
Join Date: Jan 2021
Posts: 16
I have checked on resistors and diodes. They display proper values.
I tested for cold solder without finding any.

I have traced the voltage level on the transistors of the neckboard with a multimeter (attached is a picture of the measurement). It seems the problem is from the Transistor Q702 on the green line.

the transistor is operating but does output a lower voltage than what the one on the red line is doing. Is this component the source of the problem and have a weak behavior?

https://drive.google.com/file/d/17VT...ew?usp=sharing
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.