Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 10-28-2021, 04:03 PM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
Quote:
Originally Posted by Notimetolooz View Post
It is best to just go ahead and change them all rather than go through the trouble of having to remove the chassis again. Caps are really not that expensive compared to other things that sometimes have to be replaced.

In your question about the flyback cover that is falling apart, you will have to do something to support the centering magnet rings at the very least.
There is a thread somewhere here that show how someone built up a replacement cover for another type of set.
I have also seen a post about someone else that made a new cover using a 3D printer for another set.
You mean the yoke cover? Because that's what fell apart on the 23" Zenith of mine, I unfortunately don't have access to a 3D printer, let alone the design plans for this TVs Yoke cover.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:37 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.