Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 10-15-2021, 06:06 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by vortalexfan View Post
Hello everyone, yesterday afternoon I picked up an early production run EICO Model 232 VTVM for $10 on Facebook Marketplace that unfortunately is missing its original probe, but otherwise seems to be working.

My question is, I found some modern reproduction probes for this VTVM on eBay for $37 and free shipping and I wonder if anyone on here has any experience with those probes and if they are worth the $37. Also How do these work compared to a modern DMM?

Also is this the piece of equipment they refer to when they talk about using a VTVM in the Alignment instructions for old radios in your old Riders and and Sam's Manuals? If so, how do you hook these up to do those tests?

Thanks, for your help.

See pictures below.
The Eico VTVM came with an Eico Uniprobe, that you could switch out the 1Meg isolation resistor. The DC range requires that resistor in series with the meter. The AC and Ohms range doesn't require a series resistor.
I have a Allied Knight-kit which used two separate probes. I ended up buying a Eico Uniprobe for it.
For the most part, all the VTVM's of the time, shared the same circuitry.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:48 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.