Contec KRB-1541 has washed out picture.

[jmm83]

it could be bad caps
or maybe a dirty control. did you try adjusting the brightness or contrast?
i have the same model i bought it a few yrs ago i have not used it in a while
mine buzzes when using the audio input jack not sure why

[wb2mep]

How are you driving it? Through the tuner via a modulator, or a line level video input? If you're using a direct video input, see if there is a switch near the input jacks labeled "term" or 75-ohm, try switching it and see if it improves the picture. Also, looks like the brightness is set too high. Try turning it down and turning up the contrast.

[Devicemodder]

Originally Posted by wb2mep

How are you driving it? Through the tuner via a modulator, or a line level video input? If you're using a direct video input, see if there is a switch near the input jacks labeled "term" or 75-ohm, try switching it and see if it improves the picture. Also, looks like the brightness is set too high. Try turning it down and turning up the contrast.

Driving it from composite in via an HDMI to composite converter from my desktop. the brightness is set at middle, and contrast is all the way up in the pic.

there is no 75 ohm switch, just one on the back labelled TV and Video-IN, and another to select external/internal antenna.

[Devicemodder]

Originally Posted by jmm83

it could be bad caps
or maybe a dirty control. did you try adjusting the brightness or contrast?
i have the same model i bought it a few yrs ago i have not used it in a while
mine buzzes when using the audio input jack not sure why

I did adjust the brightness and contrast. I am thinking probably bad caps as the speaker in my set also has the buzz, even if nothing is conencted to the audio input with the volume up.