Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old 08-31-2021, 12:07 PM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
OK, so a little update with this radio:

I changed out the 5Z4 for a 5Y3G tube and installed a 6V6G tube into the radio and the hum has gone away, but a new issue as arisen, whenever I touch the chassis anywhere including the knobs or ground my signal generator to the chassis, the radio goes completely silent.
But then when I remove my hand or the signal generator ground clip from the chassis or from any of the knobs, the radio comes to life.

Is it because with this radio being made to utilize the metal tubes they had one of the heater pins grounded to the shield pin of those tubes and thus to the chassis?

If so should I go and unground those heater pins to make this radio work with more modern glass tubes?
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:39 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.