![]() |
|
|
|
#1
|
||||
|
||||
|
For the tester get a tube substitution guide & see if any listed subs
are there & test it that way. May not be perfect but it should show up a really bad tube. https://www.ebay.com/itm/25507945015...QAAOSw-Xdg90sh Audio tips A HISS like a weak FM station is the audio IF stage. A BUZZ or ticking is the audio detector stage. The buzz can be effected by the ACG, fine tuning & your source. 73 Zeno ![]() LFOD ! |
|
#2
|
||||
|
||||
|
Quote:
|
|
#3
|
||||
|
||||
|
6GH8's & their cousins #GH8 were probably the worst tube
ever built. Some RCA color sets used 5 of them & after a few yrs they would be weak or leaky. Always suspect them ! Another tube checker tip. The first number of a tube is the filament voltage. A 6GH8 is the same as a 5GH8 or a 4GH8. Just the filament needs to be set to the proper voltage to test. You can also smoke out a bad tube by turning up the filament one notch ( say from 6-7volts) this can find leaky tubes that act up after the set runs a while & gets REAL hot inside. BTW You may be tempted to adjust the transformers in the audio. DOO NOT do it unless you take precautions ! AND dont change disc caps. They almost never go bad ! 73 Zeno ![]() LFOD ! |
|
#4
|
||||
|
||||
|
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|