![]() |
|
|
|
#1
|
||||
|
||||
|
Nice deal even if it needs a universally-available CRT. A 7K31 amp is truly hard to find in anything, much less a combo! I have that TOTL record changer and same tuner in a 1963 MK-2635, a very common console HiFi.
Are you sure that chassis is 25MC43? If so this is a rare bird indeed. K-models were '63s so maybe the best SS amp for '65 was no match for that 7K31. I have a 65 Zenith 25MC36 combo with a 25ABP22 and 140 "watt" stereo receiver that is all SS. No separate amp chassis either. If that SS receiver were in your combo instead, value would be half or even less with a busted CRT - LOL Every Zenith with that earlier (TOTL for 1963) 12- tube tuner chassis I have found was paired with 3K31 amp, like one I have and others I did not buy for that reason. All seemed to have those better speakers though. Zenith SE6BQ5 amps are not very powerful, yet do sound very sweet when all restored especially if you replace often cracked-looking ceramic disc caps with mylar film-dips. I bet that preamp and 7K31 amp chassis would rival a similar Fisher amp.
__________________
"When resistors increase in value, they're worthless" -Dave G Last edited by DavGoodlin; 06-25-2021 at 04:15 PM. |
|
#2
|
||||
|
||||
|
So I put the stereo on the variac today and it came to life... Because Zenith! Right channel is a bit weak and MPX isn't working but with all the bumble bees and ceramic body tubular papers in it I'm impressed it works this well. I posted a video of it up on Facebook. https://m.facebook.com/groups/233107...9611167070738/
Quote:
If you click the pic you can zoom in and read EIA 274....RCA. Which jibes with the legend that RCA sent engineers to SC to find out how the made a better picture than RCA TVs despite using an RCA made CRT. Looking closer at the safety glass there are a couple deep 2" scratches in the center of the viewing area so I can't even save the safety glass. Quote:
![]() It's facinating that they put chassis 2 model years apart into the same cabinet, but not totally shocking to me either I have a Y line rectangular console (20Ysomething) and a 20CC50 table top that both use the same face and single knob VHF/UHF tuner. Thanks for confirming my gut feeling about that amp. I had a hunch it was rare/special but I haven't owned or opened many Zenith stereo consoles so I have a limited frame of reference. It's already pretty darn good so I'd imagine with a full service it will be one of my best tube stereos. Once I get time to look at the TV chassis I kinda want to variac it and see if it would have worked if the CRT hadn't gotten crunched.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 Last edited by Electronic M; 06-26-2021 at 01:08 PM. |
|
#3
|
|||
|
|||
|
Tom, the FB link doesn't work here.
. |
|
#4
|
||||
|
||||
|
I replaced the link with something more likely to work... Not sure how to directly link the video so click on the "+3" picture and scroll down to the video.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
|
#5
|
|||
|
|||
|
Trying to figure out how to use this site yet
But are you sure about the power Ratings of a P-P 6BQ5 of this set ? I think more like 12-13 Watts per channel would be correct I would think nice set BTW Last edited by Rythm; 06-28-2021 at 05:44 PM. |
| Audiokarma |
|
#6
|
||||
|
||||
|
Quote:
The spec I quoted was from a Zenith service manual image Davgoodlin posted. Its not impossible Zenith overstated it, but it's also not impossible to achieve it in class AB. The max plate dissapation power in the 6BQ5 datasheet is 12W. Theoretically if you ran the tubes at the max plate dissapation and class AB biased to the ragged edge of going into class B you could get almost 24W out of a Push Pull 6BQ5 amp. At an amplifier calibration presentation at one of the last ARCI radiofest meets at the old Holliday Inn venue the presenter stated 20WPC as being about the max a HiFi PP 6BQ5 amp could do.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
![]() |
| Thread Tools | |
| Display Modes | |
|
|