Quote:
Originally Posted by zeno
The replacement shown has the focus built in.
It is not a direct replacement at all but could be moused.
The OEM ? in the set uses the divider resistor, the plastic part
with the other big red wire etc.
If you go further with it get the ##'s off the tripler. If a ZENITH
OEM you should find part number 212-141-## on it.
Also be sure that big resistor isnt burned. Bad triplers sometimes
burned it.
73 Zeno  |
I will attempt to find the part number on it this weekend. It seems, according to the service manual, that there are two different units. One with the built-in divider and one with the external. The SM shows the integrated unit, but notes there are two different ones.
So I have choices, I can try to keep it original and find one that uses the external divider, use the one with the integrated divider, or if possible, use the one with the internal divider, but don't use the integrated part and run the external divider.
Thoughts?
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
06-09-2021, 03:52 PM
Threaded Mode