Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 05-19-2021, 04:58 PM
Resonance1 Resonance1 is offline
VideoKarma Member
 
Join Date: Jan 2017
Posts: 34
All true. I have done all three - here is my Thingiverse page: https://www.thingiverse.com/resonance11/designs

Almost everything that I have printed for antique radios/TVs is there, including STEP files as well as .stl files, so that others can remix as they wish. The only exceptions are a few simple things like replacement elastic gaskets.

As I'm sure you already know, there are plenty of people out there who are willing to 3D print a part for you, if you send them the .stl file.

Thanks!

Last edited by Resonance1; 05-19-2021 at 05:02 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:57 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.