Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 04-27-2021, 04:40 PM
vortalexfan vortalexfan is offline
VideoKarma Member
 
Join Date: Sep 2018
Location: Northern Indiana
Posts: 1,992
Quote:
Originally Posted by Electronic M View Post
Sixty year old mylar caps while usually good aren't infallible. If that tube has a DC blocking cap coupling signal to its grid and the cap went leaky the tube could be biased to conduct too hard and fail (measuring the grid bias and comparing to the schematic will tell you if this is happening).

Tubes that have been subjected to mechanical shock can sometimes just drop dead out of nowhere and that is also a possible explanation.
Well I replaced the only capacitor that was associated with the EBF89 tube socket and still no dice (the replacement tube is still good, no shorts or anything and I tested the original capacitor and it still tested fine yet.)

Turning the tuning knob in all band modes is still producing a noisy crackly, scratchy noise when tuning across the dial, even though I blew a ton of crap out of the tuning condensers with some compressed air, and I even cleaned it out on top of that with some CRC QD Electronic Cleaner, and still no dice on the noisy tuning.

I tested the rest of the tubes in the radio (an ECH81, an ECC83, an EL84 and an EL86 and an EZ80 tube and the tubes tested fine, no shorts or anything, I even cleaned the band switching buttons with contact cleaner (the same stuff I used on the tuning condenser above) and still not getting anything, no reception, or audio or anything just a hissing noise and the crackling, scratching noise out of the tuner and thats it.

I'm at a loss here for what else to look at on this radio to get it working.

Also I noticed on the ID tag it says that its designed for 50 Cyc. A. C. Rather than 60 Cyc. AC, could that cause some issues with this radio not working correctly?
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:44 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.