Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 03-29-2021, 09:07 AM
BandDirector
Guest
 
Posts: n/a
Alignment and test equipment check, see pics. I'm going to spend some time experimenting and teaching myself to do an alignment on the RCA 21D KCS116C.

The sweep generator isn't too healthy but I can adjust the tuning lugs to match various channel number frequencies with a freq counter. Since I'm only concerned with aligning channel 3 or 4 based on what input signal (vcr/dvd combo with digital convertor) I'm focused on Sound and Video IF traps, and tuner alignment for channel 3. Also- I can't get a -6 vdc bias into the video traps to read a 3 volt peak to peak, despite numerous points to check voltages around the 1st, 2nd, and 3d video stages.

When I measure various markers of the BK generator, the waveform on the RCA scope is not a clean sinewave, so I may need to service the scope, more to learn! The waveform looks a bit ragged, and not very focused despite adjusting the scope response.

*It's not the scope, I forgot that calibrating the scope is clean and easy. Faults are *probably* in other equipment.
Attached Images
File Type: jpg 20210329_090221.jpg (109.7 KB, 28 views)
File Type: jpg 20210329_090224.jpg (102.2 KB, 22 views)

Last edited by BandDirector; 03-29-2021 at 09:01 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:36 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.