Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Portable Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 03-25-2021, 12:51 PM
MrPiggy MrPiggy is offline
VideoKarma Member
 
Join Date: Mar 2021
Posts: 5
Ta7698ap

Quote:
Originally Posted by MrPiggy View Post
Many thanks Dieseljeep
update. I pulled out the burned resistor and there was enough colour code left on the underside. It looked like a 10ohm and indeed it measured 11ohm. I replaced it and the line hold has stopped drifting. So its been on soak test all day and now developed frame jitter at the very top of the pic,and low and behold an hour later the colour went...sigh! so I think its determined to give me a hard time. I may just give up on it if I cant source a diagram and use it for spare parts?, Which is a shame because its a very clean little set. BTW. The CRT is Panasonic.
I have been looking at the TA7698AP Video-Chroma-Deflection chip data and think I might just replace this as they are relatively cheap. It does all the chroma processing and H & V deflection. It may make sense since I had Hor lock fault and then vertical jitter. And then the chroma died. Now I have data sheet it might pay to check supply rail voltage.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:39 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.