Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #22  
Old 03-23-2021, 06:21 PM
joe111671 joe111671 is offline
VideoKarma Member
 
Join Date: Nov 2007
Posts: 108
The 6HS5 regulator tube finally came. I installed it, and the new HV adjust pot (minus that resistor that was across the old one). The HV is now adjustable and I was able to set it to 25KV so I'm happy with that. Only thing now is the 750v boost is still too high at 903 volts. Not sure why, but it still has those white elemenco caps on the 750v, so I'll change them since I have them and see what happens.

The tube that was in there was a 6JD5, didn't notice that at first and have no idea if that was contributing to the unadjustable HV, or if it was just bad.

So far this set needed a good cleaning, a cap in the contrast circuit, a new focus stick, new resistor off the HV reg tube that was burnt, and HV reg tube. The HV cage was dirty, and cap on the rectifier tube had green corrosion and was causing sizzling in there.

The HV adjust pot and VDR may or may not have been bad but they're new, so all good there.

The tint is worse than before. I have the control all the way to one end and the flesh tones are still too red. It still needs the degaussing thermistor and the convergence is pretty bad, but it's working!
Attached Images
File Type: jpg 20210323_175511.jpg (41.6 KB, 33 views)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:02 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.