Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-17-2021, 06:40 PM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,254
SAMS dates it from 1954, about a year older than the stromberg carlson i found, which had a CRT that tested strong, so who knows, will have to see what happens, it IS and oddball size, but there are options.

70 degree deflection angle.
the B version IS aluminized.
as mentioned magnetic focus, with perm mag rings.
on the VERY outside chance that it's bad and or can NOT be made to work, and i deem this unlikely, but you never know
ETF has a 21XP4 which is ALMOST the same, Low voltage focus & slightly dif dimensions, with a bit of creative bodging, can be made to work, it's not THAT different in size, would have to adjust the border and mount a bit, and create a volt source for focus, but I seriously doubt this will be a problem, but I have researched it!
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
  #2  
Old 03-18-2021, 10:13 AM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Quote:
Originally Posted by Yamamaya42 View Post
SAMS dates it from 1954, about a year older than the stromberg carlson i found, which had a CRT that tested strong, so who knows, will have to see what happens, it IS and oddball size, but there are options.

70 degree deflection angle.
the B version IS aluminized.
as mentioned magnetic focus, with perm mag rings.
on the VERY outside chance that it's bad and or can NOT be made to work, and i deem this unlikely, but you never know
ETF has a 21XP4 which is ALMOST the same, Low voltage focus & slightly dif dimensions, with a bit of creative bodging, can be made to work, it's not THAT different in size, would have to adjust the border and mount a bit, and create a volt source for focus, but I seriously doubt this will be a problem, but I have researched it!
The 21XP4 is an odd-ball, 21 inch CRT with a smaller viewing surface, similar to a 21WP4 used in some Admirals.
The 21EP4 is a cylindrical face plate CRT. Check to see if it's usable first.
Reply With Quote
  #3  
Old 03-20-2021, 02:56 PM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,254
Quote:
Originally Posted by dieseljeep View Post
The 21XP4 is an odd-ball, 21 inch CRT with a smaller viewing surface, similar to a 21WP4 used in some Admirals.
The 21EP4 is a cylindrical face plate CRT. Check to see if it's usable first.
Looks like work has been done on it before, some new caps there

https://i.imgur.com/hcwNMTu.jpg


it USED to have casters....
https://i.imgur.com/HCMc3dY.jpg

not too bad looking
https://imgur.com/V9qORzf

now the VERY BAD NEWS...

https://i.imgur.com/Q4LSddi.jpg

I have no option but to get an 21XP4 from ETF and adapt it to fit and work, i wont find a 21EP4 for it. that is for sure.

It will be tricky, but it can be done...
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:49 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.