![]() |
|
|
|
#1
|
||||
|
||||
|
Seems like a pretty wasteful way of providing DC power for 2 12AX7s heaters.
![]() jr |
|
#2
|
||||
|
||||
|
Cant blow up the schematic so I could only guess. Whatever the case
the cathodes can have high current at volume. Also note I can see no bias adjustment. The other thing is HH Scott loved to make production changes & without a visit to the factory it could be a challenge. The cats there were always helpful & sometimes would run off an actual blue print ! BTW I lived & worked a few miles from the HH Scott factory. There were piles of it in the area & had I known I could have had a barn full of it for free or near so from the dump, yard sales etc. I would guess at the shop 75% of the mid to high end audio repairs were Scotties. 73 Zeno ![]() LFOD ! |
|
#3
|
||||
|
||||
|
This copy of the schematic shows more detail when blown up and indicates (in two notes) the connection of the output tubes cathodes to the 12AX7 heaters. Would this constitute a fixed bias supply for the 6L6s as well as providing filtered DC to the 12AX7 heaters?
![]() https://www.vintageshifi.com/reperto...-Schematic.pdf jr |
![]() |
| Thread Tools | |
| Display Modes | |
|
|