Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Recorded Video

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 03-10-2021, 10:48 PM
redk9258 redk9258 is offline
VideoKarma Member
 
Join Date: May 2017
Location: Troy, IL
Posts: 164
PS. The PCB must have had a production error or revision. The cap I changed was not mounted in both holes of the designated place on the PCB. One leg ran over to a pin on an IC and was soldered there. The schematic shows it connected like that. That's the way it came from the factory.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.