Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-19-2021, 10:47 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by JohnCT View Post
Yes.


There were some chassis designs (including Zenith) where the focus voltage was sourced from a divider off the second anode that could cause excessive (high) focus voltage, but yours is not like that. For your situation, we're assuming that when the TV goes out of focus, the voltage is dropping.

John
Those HV divider resistor could also cause focus voltage to drop...That was the case on my 1971 Zenith 12B13C52 chassis. The special HV divider resistor on the HV end of the focus pot was increasing in value, and I couldn't source a spare so I ended up increasing the value of a 1W carbon comp on the ground end of the pot...
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.