|
It's hard to believe that a set can pass the blue filter calibration and still have something malfunctioning.
You should know that all analog NTSC sets with modern green phosphors have an increased R-Y gain built in to compensate the yellowness of the green phosphor. What this does is decrease the amount of red in greenish colors to make up for the equivalent amount of red that is added by the yellowish green. Unfortunately, it also works the other way and over-brightens pure reds, due to the non-linear "gamma" of the picture tube. Calibrating with the blue filter gets the B-Y signal to a standard level, leaving the R-Y with this increase. This problem was solved in PAL and HDTV by doing the correct compensation for the green phosphor at a linear signal point in the camera.
In your one set that has very unbalanced drive in the reddish colors vs. others, you may have a bad color chip or some failure in the color demodulator circuit.
__________________
www.bretl.com
Old TV literature, New York World's Fair, and other miscellany
|