![]() |
|
#4
|
||||
|
||||
|
Bad news is I dont have the Sams for it. Maybe someone else
has it. While you have the boards out look over the electrolytic caps. Look for swelling, discoloring & puss leaking out the top or bottom. Cold joints & 'lytic caps probably account for 70% of failures on sets from the late 70's on so keep that in mind. Funny thing is they almost always are in the same places & across all brands. The engineers could have easily & cheaply cured most of them. But I dont complain. They paid for my house, kids collage & kept beer in the fridge ! Mostly T-bone steaks & not much pasta....... 73 Zeno ![]() LFOD ! |
| Thread Tools | |
| Display Modes | |
|
|