![]() |
|
|
|
#1
|
|||
|
|||
|
I couldn't find anything to replace that safety cap other than NOS OEM replacements on ebay which I'm guessing are no better than what was in the set. So I used the ones I ordered. I put the set in series with a 100w bulb and this is what I got. It has sound and this horizontal bar toward the top that collapses to the center of the screen when I power it off. So it may or may not work, but I'm not sure whether I should just give it full power, or if this is a sign of something. Anyone have an opinion on what I should do from here? I'd hate to ruin it since it's got life now.
|
|
#2
|
||||
|
||||
|
Quote:
Worse case is the cap will short and blow the fuse. It's when they open that you get collateral issues, and that shouldn't happen in any case. John |
|
#3
|
|||
|
|||
|
Ok John! Full power and I got a picture. Crude and no color, but a picture!
|
|
#4
|
||||
|
||||
|
Quote:
John |
|
#5
|
|||
|
|||
|
The dilithium crystals are always the first thing I check. Haven't had a bad one yet! ;-) The tube is definitely strong, despite it having instant on. It's the first solid state set I've had that has it. I'd disable it if I planned on leaving it plugged in, but I have to say that it's really cool to have a set just pop on immediately. No other TV to this day can do that.
|
| Audiokarma |
|
#6
|
|||
|
|||
|
Quote:
I guess I'm still stuck in the past! |
|
#7
|
|||
|
|||
|
As best I remember, they were a rare material that featured in various Star Trek series.
|
|
#8
|
||||
|
||||
|
Quote:
John |
![]() |
| Thread Tools | |
| Display Modes | |
|
|