Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 01-28-2021, 11:13 AM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,253
I would still like to try bypassing the delay line, but the question is, how to go about doing it w/o disturbing anything, been thinking about this for a few days now.
I don't want to A) remove the chassis yet, or B) remove the cover of the IF section where the 1st/2nd video amp tube is, and this is what I'm thinking of doing, and I want to make sure it sounds right before I try it, IE, I don't want to let any magic blue smoke out.

https://imgur.com/fnlu7ZN

re-using old pic, ignore red circles.

Remove V4, wrap kapton tape around metal shield on tube, leaving space on bottom for ground tab, wire wrap piece of magnet wire to pin 3 of V4, secure magnet wire with kapton for safety, connect magnet wire to junction of of C25 & R66, bypass complete.
This also leaves out L13, 72uh coil, I could add in one of the extra coils I have laying around, but I'm not sure if it's really needed.
I'm pretty sure that doing this won't blow anything up, but I'm not %100 sure.
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:27 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.