Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 11-18-2020, 05:52 PM
DavGoodlin's Avatar
DavGoodlin DavGoodlin is offline
Motorola Minion
 
Join Date: Aug 2011
Location: near Strasburg PA
Posts: 3,505
I like anything NOT involving heat but still nervous about handling a few really good Zenith jugs. The last three cataract removals were on RCA and GE replacement CRT's. I broke the safety glass on the FJ as it was 70% intact and there was no steady sun for weeks, so I used a heat gun. bad idea.

I just have to make it a point of getting some No 18 string and from what I understand, passing some low-voltage thru it for heating is unnecessary.

The silicone caulk I used to seal the edge of a 21FJ was white and I should have used clear as one little bit of caulk was visible after putting it back in the set. Clear tape that I used around the edge was similar to original.
__________________
"When resistors increase in value, they're worthless"
-Dave G
Reply With Quote
  #2  
Old 11-19-2020, 12:09 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
Quote:
Originally Posted by DavGoodlin View Post
I like anything NOT involving heat but still nervous about handling a few really good Zenith jugs. The last three cataract removals were on RCA and GE replacement CRT's. I broke the safety glass on the FJ as it was 70% intact and there was no steady sun for weeks, so I used a heat gun. bad idea.

I just have to make it a point of getting some No 18 string and from what I understand, passing some low-voltage thru it for heating is unnecessary.

The silicone caulk I used to seal the edge of a 21FJ was white and I should have used clear as one little bit of caulk was visible after putting it back in the set. Clear tape that I used around the edge was similar to original.
Yup.
On RCA jugs I crack 90% of safety glass using heat and pry methods.

On Zenith CRTs I've never cracked a safety glass using the wire. The wire doesn't need to be warm...heck the tube doesn't have to be warm. I've done a successful Zenith removal in a dim garage on a 45 degree fall night.
It's the safest cataract removal process I know.

Clear silicone is better. I prefer the small hand squeeze tubes over the gun type tubes as I feel it gives me more control to make a small bead. You only need 1/8" contact inward of the edge to seal and provide cushion IMO.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:39 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.