Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 09-02-2020, 10:33 AM
bandersen's Avatar
bandersen bandersen is offline
RCA 741PCS
 
Join Date: Mar 2009
Location: Chicago, IL
Posts: 8,829
It's actually not that uncommon a power supply design. Every design needs multiple voltages. Typically the main B+ for the tuner, horizontal and audio output stages, Boosted B+ for the vertical output and a lower B+ for the IF.

You have a few choices for the lower B+, power resistor voltage divider, separate secondary power transformer winding, rectifier and filter or do what this design did. Use tubes as voltage dividers. I really don't think the fluctuation is any big deal. It's going to vary as the tubes draw more or less current in response to the incoming signal.

Tube circuits are designed with a wide tolerance. I wouldn't be concerning if readings differ +/- 20% from what the service info shows.

Those caps are ceramic and very reliable. I'd be surprised if they are bad. 3,900 is more than close enough. They are just RF bypass caps.
__________________
Here are my Vintage Radio & TV YouTube Channel and Photo Gallery
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:28 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.