Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 09-01-2020, 08:35 PM
Yamamaya42's Avatar
Yamamaya42 Yamamaya42 is offline
VideoKarma Member
 
Join Date: Nov 2018
Location: Round Rock TX
Posts: 3,255
I'm defiantly going have to go go over this set for bad resistors, I tried again to bring in a signal in the tuner and it was still unstable, worked sometimes, and then blanking out to raster again, but only when there is RF input, 95v line is also unstable at this point, dropping to 82v when there is a pic locked in, and when it seems IF section collapses, it goes up to 109v, then when I remove the RF input, and the snow comes back to the screen, it goes back up to 95v.

And no sound at all from RF input.

But oddly enough, with direct AV input, the 95v is stable, and the picture is fine for a long time, I have had it on for 40 min or more.

https://www.youtube.com/watch?v=L7ypgEFao8s

the speaker was also moisture damaged so it also hardly works.

I'm sure I will find a lot of bad resistors
__________________
=^-^=
Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte.
いとおしい人のために
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.