Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > International Vintage Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 09-01-2020, 02:51 PM
Phil Phil is offline
VideoKarma Member
 
Join Date: Aug 2016
Posts: 147
W125

It isn't very clear to me, but possibly the triode section of Ra104 is some sort of video derived agc. It appears to be feeding back down the chain to the IF. If this is true then W125 would be an agc control. It is a bit difficult to tell connections from wires crossing each other, and not connected, on the schematic. It sounds to me as if you may have a problem in the IF causing low video output and low sync level. I had a very similar problem with a set one time that turned out to be caused by someone adjusting the IF transformers WAY out of alignment. Good luck with it and please let us know what you find.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:18 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.