Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 08-27-2020, 05:48 PM
julianburke julianburke is offline
VideoKarma Member
 
Join Date: May 2004
Location: Knoxville, Tennessee
Posts: 649
The neon lamp (NE2 type) was a spark gap that was in the blanking pulse and to thwart any arcs that would occur and not arc back into the set. This gimmick was found mostly in solid state sets. I talked to Jim Rinehart (RCA circuit design engineer at Indianapolis) about this and to even cheapen up a spark gap and not use the bulb was sometimes done on the PC board and kind of looked like a butterfly cut into the board. The neon bulb was a 100 volt bulb and would clamp a 90 volt or higher pulse. That is a good question though. GE who invented compactrons used them extensibly in their sets.
__________________
julian

Last edited by julianburke; 09-01-2020 at 07:45 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:24 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.