Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 07-29-2020, 02:41 PM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,496
There's a few ways to knock it down if you decide you want or need to. If you have a variac you could plug that in either before or after the isolation transformer and use that to dial the voltage. If the transformer is beefy you could plug in some 60W or higher incandescent/halogen bulbs to it's output to try and load it down.
If you have a 120V to 12V step-down transformer you could wire that as a bucking transformer... basically connect one 12V lead to one 120V lead, connect a plug across the 120V leads and connect an outlet to the 12V lead that isn't connected, and the 120V lead that isn't connected to the 12V winding...you may have to swap the 12V wires to achieve bucking (it will either buck line voltage 12V or boost it 12V depending on how you connect it). Google line buck boost transformer circuit to see a schematic before you wire it.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.